MODEL
X540/54X (2010)
| MODEL |
X540/54X (2010) |
|||
|
||||
| Engine | ||||
|
||||
| Power | 26 hp (19.4 kW)* | |||
|
|
|||
| *Engine hp is provided by engine mfr. for comparison purposes. Actual operating hp will be less. | --- | |||
|
|
|||
| Displacement | 41.2 cu in. (675 cc) | |||
|
|
|||
| Manufacturer | Kawasaki | |||
|
|
|||
| Cylinders | V-twin, cast-iron liners | |||
|
|
|||
| Type | Overhead valve (OHV), oil filter | |||
|
|
|||
| Battery | 500 cold-crank amps | |||
|
|
|||
| Choke/Speed Control | Separate levers | |||
|
|
|||
| Cooling Method | Liquid | |||
|
|
|||
| Fuel Tank Capacity, U.S. gallon | 5 | |||
|
|
|||
| Fuel Gauge | Yes | |||
|
|
|||
| Transmission | ||||
|
||||
| Type | Automatic with differential lock | |||
|
|
|||
| Control | Twin Touch pedals | |||
|
|
|||
| Cruise Control | Lever on dash | |||
|
|
|||
| Forward Speed, mph (km/h) | 0 to 7.2 (0 to 11.6) | |||
|
|
|||
| Reverse Speed, mph (km/h) | 0 to 5.2 (0 to 8.4) | |||
|
|
|||
| Chassis | ||||
|
||||
| Frame | Fully welded | |||
|
|
|||
| Primer/Paint | E-coat/powder | |||
|
|
|||
| Weight Bracket | Standard front and rear | |||
|
|
|||
| Front Tires | 16x6.5-8 turf | |||
|
|
|||
| Rear Tires | 24x12-12 heavy duty all purpose | |||
|
|
|||
| Front Axle | Cast iron | |||
|
|
|||
| Hood Material | Xenoy | |||
|
|
|||
| Hourmeter | Yes | |||
|
|
|||
| 12 Volt Outlet | Yes | |||
|
|
|||
| Service Interval Decal | Yes | |||
|
|
|||
| Covered Toolbox | Yes | |||
|
|
|||
| Tool Tray | Yes, under seat | |||
|
|
|||
| Fender Handles | Yes | |||
|
|
|||
| Cup Holder | Yes | |||
|
|
|||
| Steering | ||||
|
||||
| Type | Power, two-wheel steer | |||
|
|
|||
| Tilt Steering Wheel | Yes, five position | |||
|
|
|||
| Turning Radius, in. (mm) | 22 (559) | |||
|
|
|||
| Uncut Circle Radius | 24 in. (54X Mower) | |||
|
|
|||
| Spindle Bushings | Metal, replaceable | |||
|
|
|||
| Seat | ||||
|
||||
| Seat Back Height | 16-in. open-back design with handle | |||
|
|
|||
| Fore-aft Adjustment | 7 in. while seated | |||
|
|
|||
| Seat Suspension | Coil springs, three-position no-tools adjustment for operator weight | |||
|
|
|||
| Lift System | ||||
|
||||
| Type | Hydraulic | |||
|
|
|||
| Mower Cut Height | 1 in. to 4 in., 13 position | |||
|
|
|||
| Cut Height Increments | 0.25 in. | |||
|
|
|||
| Preset Cut Height | Yes | |||
|
|
|||
| Mower Deck | ||||
|
||||
| Type | Side discharge | |||
|
|
|||
| Mower Deck Material | 0.135 in. (3.4 mm) | |||
|
|
|||
| Mower Wheel Adjustment | Seven-position, spring-loaded pin | |||
|
|
|||
| Mower Level Adjustment | At mower lift links | |||
|
|
|||
| Mower Drive System | In-line belt | |||
|
|
|||
| Mower Attachability | ||||
|
||||
| Front Draft Arms | Attached with spring pins at two points | |||
|
|
|||
| Rear Draft Arms | Quick-pull pins | |||
|
|
|||
| Belt Tension | Spring with release lever | |||
|
|
|||
| Mower Wheels Rotate | Yes, 90 degrees for easy mower removal | |||
|
|
|||
| Safety | ||||
|
||||
| Meets ANSI Standard | Yes | |||
|
|
|||
| Backup Protection | RIO | |||
|
|
|||
| Safety Video | Yes | |||
|
|
|||
| Dimensions | ||||
|
||||
| Wheelbase | 51.2 in. (1300 mm) | |||
|
|
|||
| Overall Length | 79 in. (200.7 cm) | |||
|
|
|||
| Width without mower | 41 in. (104.1 cm) | |||
|
|
|||
| Width with mower | 64.5-in. (1638 mm) | |||
|
|
|||
| Width with mower (deflector raised for storage) | 57.5-in. (1460 mm) | |||
|
|
|||
| Height | 48 in. (121.9 cm) | |||
|
|
|||
| Weight | 874 lb (396 kg) with fuel and mower | |||
|
|
|||
| Buyer's Notes | ||||
|
||||
| Note 1 | Heavy-duty garden tractor transaxle | |||
|
|
|||
| Note 2 | Steering spindle bushings for long life | |||
|
|
|||
| Note 3 | Built-in front and rear weight bracket | |||
|
|
|||
| U.S. Warranty | 4 year/500 hour | |||
|
|
|||
| Optional Attachments | ||||
|
||||
| Mowers | 54X (standard) | |||
|
|
|||
| Material Collection System | 7-, 14-, 19-bu Power Flow | |||
|
|
|||
| Mulching System | Yes | |||
|
|
|||
| Front Thatcher | 38 in., 46 in., 54 in. | |||
|
|
|||
| Front Blade | 48 in. | |||
|
|
|||
| Tractor Shovel | 40 in. | |||
|
|
|||
| Snow Blower | 47 in. | |||
|
|
|||
| Rotary Tiller | 30-in. mechanical, 42-in. hydraulic | |||
|
|
|||
| Front Bumper | Standard equipment | |||
|
|
|||
| Brush Guard | Yes | |||
|
|
|||
| Bucket Holder | Yes, single and double | |||
|
|
|||
| Weather Enclosure | Yes | |||
|
|
|||
| Sleeve Hitch | Yes, implements include box scraper, rear blade, plow, disk, and cultivator | |||
|
|
|||
| Tow-Behind Tools | 19 | |||
| MODEL |
X540/54X (2011) |
|||
|
||||
| Engine | ||||
|
||||
| Power | 26 hp (19.4 kW)* | |||
|
|
|||
| *Engine hp is provided by engine mfr. for comparison purposes. Actual operating hp will be less. | --- | |||
|
|
|||
| Displacement | 41.2 cu in. (675 cc) | |||
|
|
|||
| Manufacturer | Kawasaki | |||
|
|
|||
| Cylinders | V-twin, cast-iron liners | |||
|
|
|||
| Type | Overhead valve (OHV), oil filter | |||
|
|
|||
| Battery | 500 cold-crank amps | |||
|
|
|||
| Choke/Speed Control | Separate levers | |||
|
|
|||
| Cooling Method | Liquid | |||
|
|
|||
| Fuel Tank Capacity, U.S. gallon | 4.5 | |||
|
|
|||
| Fuel Gauge | Yes | |||
|
|
|||
| Transmission | ||||
|
||||
| Type | Automatic with differential lock | |||
|
|
|||
| Control | Twin Touch pedals | |||
|
|
|||
| Cruise Control | Lever on dash | |||
|
|
|||
| Forward Speed, mph (km/h) | 0 to 7.2 (0 to 11.6) | |||
|
|
|||
| Reverse Speed, mph (km/h) | 0 to 5.2 (0 to 8.4) | |||
|
|
|||
| Chassis | ||||
|
||||
| Frame | Fully welded | |||
|
|
|||
| Primer/Paint | E-coat/powder | |||
|
|
|||
| Weight Bracket | Standard front and rear | |||
|
|
|||
| Front Tires | 16x6.5-8 turf | |||
|
|
|||
| Rear Tires | 24x12-12 heavy duty all purpose | |||
|
|
|||
| Front Axle | Cast iron | |||
|
|
|||
| Hood Material | Xenoy | |||
|
|
|||
| Hourmeter | Yes | |||
|
|
|||
| 12 Volt Outlet | Yes | |||
|
|
|||
| Service Interval Decal | Yes | |||
|
|
|||
| Covered Toolbox | Yes | |||
|
|
|||
| Tool Tray | Yes, under seat | |||
|
|
|||
| Fender Handles | Yes | |||
|
|
|||
| Cup Holder | Yes | |||
|
|
|||
| Steering | ||||
|
||||
| Type | Power, two-wheel steer | |||
|
|
|||
| Tilt Steering Wheel | Yes, five position | |||
|
|
|||
| Turning Radius, in. (mm) | 22 (559) | |||
|
|
|||
| Uncut Circle Radius | 24 in. (54X Mower) | |||
|
|
|||
| Spindle Bushings | Metal, replaceable | |||
|
|
|||
| Seat | ||||
|
||||
| Seat Back Height | 21-in. open-back | |||
|
|
|||
| Fore-aft Adjustment | 7 in. while seated | |||
|
|
|||
| Seat Suspension | Coil springs, three-position no-tools adjustment for operator weight | |||
|
|
|||
| Lift System | ||||
|
||||
| Type | Hydraulic | |||
|
|
|||
| Mower Cut Height | 1 in. to 4 in., 13 position | |||
|
|
|||
| Cut Height Increments | 0.25 in. | |||
|
|
|||
| Preset Cut Height | Yes | |||
|
|
|||
| Mower Deck | ||||
|
||||
| Type | Side discharge | |||
|
|
|||
| Mower Deck Material | 0.135 in. (3.4 mm) | |||
|
|
|||
| Mower Wheel Adjustment | Seven-position, spring-loaded pin | |||
|
|
|||
| Mower Level Adjustment | Exact Adjust ports and onboard deck-leveling gauge | |||
|
|
|||
| Mower Drive System | In-line belt | |||
|
|
|||
| Mower Attachability | ||||
|
||||
| Front Draft Arms | Attached with spring pins at two points | |||
|
|
|||
| Rear Draft Arms | Quick-pull pins | |||
|
|
|||
| Belt Tension | Spring with release lever | |||
|
|
|||
| Mower Wheels Rotate | Yes, 90 degrees for easy mower removal | |||
|
|
|||
| Safety | ||||
|
||||
| Meets ANSI Standard | Yes | |||
|
|
|||
| Backup Protection | RIO | |||
|
|
|||
| Safety Video | Yes | |||
|
|
|||
| Dimensions | ||||
|
||||
| Wheelbase | 51.2 in. (1300 mm) | |||
|
|
|||
| Overall Length | 78 in. (198 cm) | |||
|
|
|||
| Width without mower | 41 in. (104.1 cm) | |||
|
|
|||
| Width with mower | 64.5-in. (1638 mm) | |||
|
|
|||
| Width with mower (deflector raised for storage) | 57.5-in. (1460 mm) | |||
|
|
|||
| Height | 48 in. (121.9 cm) | |||
|
|
|||
| Weight | 840 lb (381 kg) with mower, no fuel | |||
|
|
|||
| Buyer's Notes | ||||
|
||||
| Note 1 | Heavy-duty garden tractor transaxle | |||
|
|
|||
| Note 2 | Steering spindle bushings for long life | |||
|
|
|||
| Note 3 | Built-in front and rear weight bracket | |||
|
|
|||
| U.S. Warranty | 4 year/500 hour | |||
|
|
|||
| Optional Attachments | ||||
|
||||
| Mowers | 54X (standard) | |||
|
|
|||
| Material Collection System | 7-, 14-, 19-bu Power Flow | |||
|
|
|||
| Mulching System | Yes | |||
|
|
|||
| Front Thatcher | 38 in., 46 in., 54 in. | |||
|
|
|||
| Front Blade | 48 in. | |||
|
|
|||
| Tractor Shovel | 40 in. | |||
|
|
|||
| Snow Blower | 47 in. | |||
|
|
|||
| Rotary Tiller | 30-in. mechanical, 42-in. hydraulic | |||
|
|
|||
| Front Bumper | Standard equipment | |||
|
|
|||
| Brush Guard | Yes | |||
|
|
|||
| Bucket Holder | Yes, single and double | |||
|
|
|||
| Weather Enclosure | Yes | |||
|
|
|||
| Sleeve Hitch | Yes, implements include box scraper, rear blade, plow, disk, and cultivator | |||
|
|
|||
| Tow-Behind Tools | 19 | |||
|
|
|||